Synology server not found on network

Synology server not found on network

Fix nas drive not visible on network windows 10/8/7 [4

I finally had a few moments to test out the mixed-environment Synology backup workflow that I’d been wanting to try, but I needed to make some fast changes to some boxes that I hadn’t used in a while. I had no idea I’d have to reschedule it once again.
[2017.06.13 update. For this exercise, I’ll assume your Synology is connected to a router/switch rather than being directly connected to a device. If you connect the Synology to a device that isn’t running DHCP, you’ll get a 169.254.X.Y address, which means it won’t connect to the Internet and these instructions won’t work.]
Yeah, indeed. “Connection failed,” says the bad. The error “Please check your Internet Connection” is shown. Many a poor soul has been perplexed by this question. According to legend, the Ancient Mayans are the only ones who have successfully overcome this devilish dilemma, as they were also able to count to 2012 and start over without fearing the end of the world.
If it isn’t already available, go to the control panel (that’s the icon I showed above). Then you’ll want to search for the “Network” button. It resembles a small house perched on top of a sewer line (which, if you know anything about networking, is entirely appropriate):

How to fix nas drive not visible on network windows 10

Some device configurations are disabled by default for security reasons. As a result, your Synology NAS can not be available in Windows File Explorer under Network. If your Synology NAS does not appear, make sure the following settings on both your Synology NAS and your Windows machine are correct.
When several Windows computers are on the same subnet, they can compromise and choose one of them to be the “local master browser.” The local master browser keeps track of the other computers on the same subnet, as well as their shared resources, and shares this knowledge with them. The Synology NAS can take on the function of local master browser with this option enabled. To activate, follow the instructions below:
Make sure your Windows computer’s NetBIOS service is turned on. You should be able to ping your Synology NAS by its hostname once the NetBIOS service is up and running. If it hasn’t already been activated on your computer, follow the steps below to do so:

How to setup a synology nas (dsm 6) – part 34: configuring

I double-checked the DNS entries on both NAS and they are correct. Today, I checked the firewall on the troublesome NAS and found that nothing was being blocked. I attached my machine’s IP to the Allow list just to see what might happen, but nothing changed.
This issue has existed since I first set up the NAS, and Synology informed me that there was a network issue in my environment. We bought a new switch for this and other purposes. The dilemma had been somewhat alleviated, but it was not fully fixed.
Finally, I discovered that during my initial troubleshooting, I had entered a path in Control Panel > Network > Static Route. My pings on both NAS went through the second I removed the road.
If none of those options are available, I’ll try to work my way out of the Synology and into the network. Attach a PC and only the NAS to a spare switch (if you have one) to make sure you can reach and ping it. Then, if you can, add this spare switch to the current firewall and see if you can still ping/connect.
If none of those options are available, I’ll try to work my way out of the Synology and into the network. Attach a PC and only the NAS to a spare switch (if you have one) to make sure you can reach and ping it. Then, if you can, add this spare switch to the current firewall and see if you can still ping/connect.

How to find ip address of synology nas diskstation

On the Gryphon network, this document explains how to set up a Synology network-attached storage (NAS) system. One such system is emu, which we currently have. The MAC addresses and serial number are printed on the back of this Synology model DS1515+ NAS. Synology’s website features some documents as well as an active web forum.
This is something you should ask Dave to do. He’ll tell you what IP address to give the NAS and what system name to give it. Since it is a very large-capacity storage unit, the original NAS is called emu. The IP address will be in the format 192.168.100.x, with x being the NAS’s unique number. When you’re finished with this mission, move on to the next one.
If the same message occurs, or if the server cannot be identified, the configuration utility (see section 2.4.2) is required. If any method locates the NAS, you’ll be brought to a page that functions as a NAS administration tool. You’ll be told to update the most recent version of the operating system and create an administrator password, among other things. See section 2.5 for instructions on how to connect users and make the drive available to them.

About the author

admin

View all posts