Pfsense ios app
- Pfsense ios app
- How to block websites such as youtube and facebook using
- Tutorial 18: pfsense – ipsec vpn config on iphone/ipad
- Testing wireguard in the pfsense 2.5 beta / development
- Pfsense & chromecast across subnets/vlans w/ avahi
- Pfsense mobile client ipsec setup
- Pfsense and rules for iot devices with mdns
- How to block or allow an ip address and port in pfsense
How to block websites such as youtube and facebook using
My primary LAN address is 10.10.60.x. At 10.10.61.x, I have a different VLAN (IOT) for my media devices. I’m using pfsense, and it’s set up properly. I configured my media devices to connect to Plex, which is located on my LAN. Plex is accessible from the IOT network through a combination of wired and wifi on my Apple TV, Amazon Fire TV, and two Samsung TVs. However, neither the XBOX nor the XBOX app will reach Plex or my iPhone. I made a rule to connect to my iPhone directly.
I will connect to the XBOX when I connect my iPhone to the IOT network. It is unable to connect to my LAN. And I’m gaining access to it by entering my IP address. The XBOX is set up to accept connections from everyone via the iPhone app.
I have my own private network, which I refer to as LAN.net.
IOT.net is the xbox, and I’ve added the settings. LAN.net will go anywhere it wants. IOT.net can’t, as you’ll see from where I’ve let it go. As you can see, xbox is 10.10.61.16.
It seems that the Xbox App wants the Xbox to be in the same broadcast domain, which is a pain for those of us who want to practice security at home while still taking advantage of cool features.
Tutorial 18: pfsense – ipsec vpn config on iphone/ipad
What exactly is an SSL error? I’m still thinking it’s SquidGuard’s fault. It’s possible that when it intercepts web traffic, it causes SSL errors. The “Man in the Middle Attack” (not exactly an attack in the actual sense of the term in this case, but that’s what it’s called) is how these systems operate. Modern systems recognize this and shut down. MitM breaks stuff like HSTS, a https security feature that is explicitly designed to prevent SSL interception. As a consequence, programs would not be able to communicate. Perhaps double-check the SquidGuard is truly disabled. Any other programs that could be causing similar issues should be investigated (any web filters on pfsense or elsewhere in the path to the Internet).
Thank you for your response, and I apologize for the delay in responding. When I asked this question on the Netgate Forum, I was told to look in the Squidaccess Logs for TAG NONE/409 errors. After checking the log, I was able to confirm that this was actually happening. He told me to clear the Squid cache logs, but I didn’t note any difference. I had some network downtime over the weekend and was able to dig a little deeper. I restored the machine from a known running backup from August and received the same errors in the log. The Netgate moderator advised me to clear cache, reinstall SquidGuard, and double-check DNS routing. I also made a NAT rule to redirect internal DNS traffic to 127.0.0.1. Still no luck, so I fired up WireShark today and discovered that MDNS packets are invading the network, with the majority of addresses being 22.214.171.124. MDNS, as far as I can tell, is a computer-to-computer DNS lookup for small networks without a DNS server. Is that accurate? Is it right that MDNS flooding causes this impact on iOS and Android devices? Can I just block the MDNS port (5353) from the LAN if this is the case? Thank you very much for all of your assistance; it is greatly appreciated! Patrick is a man of many talents.
Testing wireguard in the pfsense 2.5 beta / development
When you save, your private and public keys will be created for you if you go back and edit the configuration.
Pfsense & chromecast across subnets/vlans w/ avahi
As you can see in the image below.
Pfsense mobile client ipsec setup
Add your friends.
Pfsense and rules for iot devices with mdns
To add a new Endpoint, go to the Endpoints tab and press +.
Setting 20 here will ping the tunnel every 20 seconds to keep it up, but the drawback would be a reduction in battery life, so I chose to leave it blank; the connection will be re-established when needed anyway.
Simply rinse and repeat with each client you want to add, remembering to increment the Permitted IPs Tunnel each time, so the next client will be 10.252.0.3/24.
In the screenshot below, you can see that I’ve already filled in my Public Key; more on that later.
Choose your associates.
Simply return to the Local tab, update your configuration, and pick phone from the peers list.
The WireGuard port should be forwarded.
NAT => Firewall => Forward to the port The 51820 port will now be forwarded to the OPNSense computer, allowing peers from the WAN to enter the WireGuard tunnel.
How to block or allow an ip address and port in pfsense
When I tried to set up an IPsec-based VPN on pfsense for iOS and macOS clients, I ran into a variety of issues. Initial tunnel connection, authentication, DNS through VPN tunnel, on-demand VPN connections for iPhone and Mac, and routing all VPN client traffic through the tunnel were issues I couldn’t find answers to quickly on the site.
I found a slew of responses to various problems, some of which contradicted each other, and all of this was scattered around various websites. For this purpose, I decided to write down some configuration instructions so that those with similar problems, as well as myself, can understand and recreate a working setup.
Screenshots of the parameters needed for pfsense IPSec to operate with iOS are used extensively in the instructions. I advise that you align yourself with it as closely as possible. I didn’t add many comments because they might have been very lengthy.