Huawei honor 8 screen

Huawei honor 8 screen

Huawei honor 8 screen replacement

The back glass of the phone must be heated for 1 to 2 minutes with a hair dryer before being removed. Since the glass is very well glued, we suggest heating it up again in the disassembly process to prevent cracking it.
Pry the battery off with the big spudger inserted underneath it.
The amount of glue beneath the battery is crucial and strong. It will take some time to eliminate this. During the removal, do not bend or drill the battery. Remove it until it has been peeled off.
The panel must be heated for 3 to 5 minutes with a hair dryer in order to be removed.
The Huawei Honor 8’s screen is securely connected to the case. To make it faster, we recommend heating it up in small increments. When removing the projector, use extreme caution because it is delicate. It is easily breakable.
Place the iSesamo in the top left corner of the screen, as seen in the photos, and leave a small gap between them.
Take your time and show strict caution.
Place the nylon spudger into the gap and slowly work your way down the panel, eliminating the left side of the screen.

Huawei honor 8 screen repair, teardown and reassemble

The Honor 8 is a smartphone from Honor, a Huawei Group sub-brand. It is part of the Huawei Honor series.

Huawei honor 8 display repair | lcd replacement guide

It has an eight-core HiSilicon Kirin 950 processor, a Mali-T880 MP4 GPU, and a 3000 mAh (typical) battery. The phone has a storage capacity of 32 or 64 gigabytes (GB)[5] and 4 GB of LPDDR4 RAM. [6][7][2][8][9][6][7][7][2][8][9] It has a 5.2-inch (13 cm) 2.5D glass liquid-crystal display (LCD) with a resolution of 10801920 pixels and “multilayer optical filming” to capture and reflect light. [two] [8] The dual 12-megapixel (MP) camera setup on the phone is flush with the reverse glass screen. [two] [8] One rear camera has a lens for capturing details, while the other has an RGB sensor for recording color data. [2][8] The two images that arise are then combined. [10][2][10][2][10][2][ [11] The camera app provides a “Broad Aperture” mode, which allows users to change the focus and depth of field after an image has been taken, among other features. [eight] [10] The Honor 8 also has an 8MP camera on the front. [12][13][14][15][16][17][
An earpiece with built-in notification LED, a fingerprint sensor on the back of the handset, an infrared port that enables the phone to serve as a universal remote, dual SIM card support in select versions,[3] a USB 2.0 with Type-C interface connector, and QuickCharge support are among the other features.
[2][14][15] [2][14][15] Apart from scanning fingerprints, the fingerprint sensor also functions as a customizable “smart button,” allowing users to open applications or scroll up and down the screen. [number six] (12) (#13) Users may also take screenshots or capture videos by pressing their knuckles on the screen, or draw letters to open specific applications. [nine] (12)

Huawei honor 8 screen repair | lcd & touchscreen

Basics After Market It is with generally accepted major complaint replacements for original parts that maintains a good price-quality ratio. It has a long-term supply chain in China, and all of the screen’s components are of high quality. The LCD screen is typically made by many different factories, with JK, AUO, LongTeng, and ShenChao being the most common four on the Chinese market. By comparing the brightness and sharpness of the LCDs, we discovered that JK has the highest quality, followed by AUO. The other items on the computer, without a doubt, are all copies.
Following the Market Norm Since it includes original laminated flexes and the LCD panel, it is superior to After Market Basic. Other parts, such as the touch screen, frame (hot pressed), backlight, polarize lens, and OCA, are all knockoffs from various manufacturers.
Picked After the Business The core components (such as the LCD and flexes) were taken directly from a used iPhone, while the frame and touch panel were copied. The touch panel and frame are stuck together with cold pressed glue and assembled with the LCD by a capable third-party factory, retaining the high quality.

Huawei honor 8 display reparatur – tutorial

Like the Huawei P9, the Honor 8 has an IPS-NEO LCD panel from JDI (Japan Display Inc.), which supports in-cell touch (touchscreen layers are incorporated into the display stack rather than existing as separate layers above the display) and panel self-refresh. The panel is made of LTPS (Low Temperature Poly-Silicon) TFTs, which have a higher carrier mobility than a-Si (amorphous silicon) TFTs. Since the drive circuits are located on the glass substrate, the black border around the display’s active region is thinner, allowing for higher aperture ratios and more effective light transmission. This 5.2-inch screen has a 1920×1080 resolution and a pixel density of 423ppi, which is appropriate for an LCD display.
The Honor 8 has a high-resolution screen, but it needs to be calibrated properly to provide excellent picture quality. Grayscale and color accuracy will suffer if Huawei fails to set the gamma, white point, and RGB balance correctly. We’ll use an X-Rite i1Pro 2 spectrophotometer for color measurements and an i1Display Pro colorimeter for luminance measurements to assess the display’s accuracy, with the data managed by SpectraCal’s CalMAN 5 program.

About the author

admin

View all posts