Honor 8 screen

Honor 8 screen

Honor 8 pro screen replacement – how do we test each

Basics After Market It is with generally accepted major complaint replacements for original parts that maintains a good price-quality ratio. It has a long-term supply chain in China, and all of the screen’s components are of high quality. The LCD screen is typically made by many different factories, with JK, AUO, LongTeng, and ShenChao being the most common four on the Chinese market. By comparing the brightness and sharpness of the LCDs, we discovered that JK has the highest quality, followed by AUO. The other items on the computer, without a doubt, are all copies.
Following the Industry Standard Since it includes original laminated flexes and the LCD panel, it is superior to After Market Basic. Other parts, such as the touch screen, frame (hot pressed), backlight, polarize lens, and OCA, are all knockoffs from various manufacturers.
Selected After the Market The core components (such as the LCD and flexes) were taken directly from a used iPhone, while the frame and touch panel were copied. The touch panel and frame are stuck together with cold pressed glue and assembled with the LCD by a capable third-party factory, retaining the high quality.

Honor 8 pro display and touch screen combo testing video

The back glass of the phone must be heated for 1 to 2 minutes with a hair dryer before being removed.

Huawei honor 8 screen repair | lcd & touchscreen

Since the glass is very well glued, we recommend heating it up again in the disassembly phase to avoid breaking it.
Pry the battery off with the large spudger placed underneath it.
The amount of glue beneath the battery is crucial and strong. It will take some time to eliminate this. During the removal, do not bend or drill the battery. Remove it until it has been peeled off.
The screen must be heated for 3 to 5 minutes with a hair dryer in order to be removed.
The Huawei Honor 8’s screen is firmly attached to the case. To make it faster, we recommend heating it up in small increments. When removing the projector, use extreme caution because it is delicate. It is easily breakable.
Place the iSesamo in the top left corner of the screen, as seen in the images, and leave a small gap between them.
Take your time and exercise extreme caution.
Place the nylon spudger into the gap and slowly work your way down the panel, eliminating the left side of the screen.

Huawei honor 8 (frd-l02) lcd screen & digitizer

On an Honor 8, glass isn’t necessarily the only thing that breaks. A drop can also damage the LCD, resulting in a black screen, lines across the monitor, or a screen that does not respond to touch or swipe gestures properly. Come in today and we’ll get started on your Honor 8’s glass/LCD repair.
Our low price guarantee means that we always give our customers the best deal. Bring in any reported price for the same repair from a nearby competitor, and we’ll gladly match and beat it by $5.

Huawei honor 8 display repair | lcd replacement guide

Like the Huawei P9, the Honor 8 has an IPS-NEO LCD panel from JDI (Japan Display Inc.), which supports in-cell touch (touchscreen layers are incorporated into the display stack rather than existing as separate layers above the display) and panel self-refresh. The panel is made of LTPS (Low Temperature Poly-Silicon) TFTs, which have a higher carrier mobility than a-Si (amorphous silicon) TFTs. Since the drive circuits are located on the glass substrate, the black border around the display’s active region is thinner, allowing for higher aperture ratios and more effective light transmission. This 5.2-inch screen has a 1920×1080 resolution and a pixel density of 423ppi, which is adequate for an LCD display.
The Honor 8 has a high-resolution screen, but it needs to be calibrated properly to provide excellent picture quality. Grayscale and color accuracy will suffer if Huawei fails to set the gamma, white point, and RGB balance correctly. We’ll use an X-Rite i1Pro 2 spectrophotometer for color measurements and an i1Display Pro colorimeter for luminance measurements to assess the display’s accuracy, with the data managed by SpectraCal’s CalMAN 5 program.

About the author


View all posts