Dir 615 access point

Dir 615 access point

D-link dir-615 wps

When using some kind of wireless protection, my D-Link DIR-615 N300 wireless router has serious issues with dropouts (WPA, WEP etc.). This is a major issue that has been identified by a large number of people, and there were no official firmware updates available. As a result, I came across DD-WRT, an open source router firmware for Broadcom routers like mine (hardware C2, firmware 3.03WW).
I then needed to connect the computer to my network as an extra wireless access point, so I followed the setup instructions here. The only ruse was that the wireless radio refused to turn on. It turns out that the firmware has a bug, and in order for the radio to turn on, you must activate the “MAC Address Cloning” option. What a strange coincidence! Anyway, it’s running well now and has a lot more features than the stock firmware.

Dsl 2730e access point

You’ll have to rephrase your issue. The way you posted it isn’t really obvious. This forum has a sticky post as well as various tips on how to use a router as an AP. You can also find videos on YouTube.
You’ll have to rephrase your issue. The way you posted it isn’t really obvious. This forum has a sticky post as well as various tips on how to use a router as an AP. You can also find videos on YouTube.
Thank you for your time and thought. All videos and instructions found on the internet or on YouTube do not work. I was only able to reach the router settings after resetting it to factory defaults by pressing and keeping the reset button, but not as an administrator. I’d like to use that router as an access point because I have DSL and only need wifi signals to use the internet on my tablet. I’m not sure what’s going on. I tried every tool I could find on the internet by myself. I’m looking for some advice on this. Since I am not a computer genius, I have to search for answers on the internet whenever I run into a problem.

Dir-615 wifi setup

I made the mistake of purchasing a DIR 615 B2 router without first reading the incompatibility list. The purpose: To have the DIR 615 B2 as a receiving end of my Netgear WNDR3400 running DD-WRT v24-sp2 (12/08/11) mega (SVN revision 17990M NEWD-2 K2.6 Eko) mega (SVN revision 17990M NEWD-2 K2.6 Eko) mega (SVN revision 17990M NEWD-2 K2.6 Eko) mega (SVN revision 17990M NEWD-2 K2.6 Eko)
10) (June 4, 2012) And that’s it! You now have a wireless access point on your house. I put it to the test by turning off the wireless on my main router and… YEAH! We also have access to wireless internet (through the D-Link router). You can also access your D-Link router settings by typing “192.168.1.253” into any device connected to your LAN.

How to configure etisalat dlink router as access point

1. Connect the router to the power source. Using an Ethernet cable, connect one of your computers to the router’s LAN port. Make sure your computer’s IP address is 192.168.0.xxx (where xxx is between 2 and 254). For more details, see the Networking Basics section. If you need to change the settings, make a list of what you already have before making any adjustments. In certain instances, your device should be configured to automatically receive an IP address, which means you won’t have to do anything.
5. In the Router Settings section, enter an available IP address and your network’s subnet mask. To save your settings, press Save Settings. In the future, use this new IP address to access the router’s configuration utility. Close the window and restore your computer’s IP settings to their defaults, as described in Step 1.
8. Now you can link other Ethernet devices and computers to the other three LAN ports. Open a web browser and type in the IP address you assigned to the router to configure your wireless network. For more detail on setting up your wireless network, see the Configuration and Wireless Security pages.

About the author

admin

View all posts